|
Product Details:
|
| Service Life: | > 20000 Hours | Dimension: | 3.75mm*3.75mm*1.47mm |
|---|---|---|---|
| Peak Wavelength: | 360~370nm | Packaging Technology: | Silicone Dispensing |
| Radiation Angle,: | 120° | Chip: | Vertical Chip |
| Forward Voltage: | 3.5~4.5V | Radiant Flux: | 1400~1800mW |
| High Light: | 1.8w Surface Mount UV LED,370nm Surface Mount UV LED,4.5V Surface Mount UV LED |
||
BYTECH 1.4w to 1.8w high quality surface mount 360nm 365nm 370nm 3535 smd uv led
Company Introduction:
Bytech is the first company in China to launch full inorganic package UV LED, and CMH (Ceramic,Metal,hard glass) technology is a independent intellectual property owned by BYTECH.
At present,Our UV LED product cover wavelengths of UVA, UVB and UVC, which has been applied for offset printing, screen printing, ink-jet printing, intaglio printing, UV exposure, air purification, sterilization, 3D printing and other industries.
Characteristics of UVB LED
- Electrical / Optical Characteristics (Ta=25℃, RH=40%)
| Parameter | Symbol | Units | Value |
| Peak Wavelength | λp | nm | 360-370 |
| Radiant Flux | Φe | mW | 1400~1800 |
| Forward Voltage | VF | V | 3.5~4.5 |
| Thermal Resistance | Rth | °C/W | 5 |
| Spectrum Half Width | Δλ | nm | 9 |
| View Angle | 2θ1/2 | deg | 120 |
- Absolute Maximum Ratings (Ta=25°C, RH=40%)
| Parameter | Symbol | Units | Value |
| DC Forward Current | IFmax | mA | 1000 |
| Maximum Rating Junction Temperature | Tjmax | °C | 115 |
| Operating Temperature Range | Topr | °C | -20 ~ +65 |
| Storage Temperature Range | Tstg | °C | -40 ~ +85 |
Product ID: U535A4V133Z1
● U: Packaging technology,silicone dispensing
● 5: radiation angle,120°;
● 35: package size,3.5mm*3.5mm;
● A4: peak wavelength,360~370nm;
● V133: LED chip code, vertical chip;
● Z1: Zener chip code.
Package Dimensions and Circuit
(Unit: mm)
Product Application Information
Production Line
Quality Control
In order to continuously enhance the quality of management and meet customers’ needs, we have passed through the ISO9001 quality management system certification.
fixtures modern is produced through standard procedures conducted by trained staffs.
100% of the LED fixtures will be tested and keep lighting for 24 hours to test its quality reliability, and we will also test its temperature after 24 hours lighting.
Then after it is cool we again test 100% of the lamps to see if it still work well. Each led Cabinet light should pass all these QC procedures before the packing.
Contact Person: Helen Yang
Tel: +86-13590418367
