|
Product Details:
|
Service Life: | > 20000 Hours | Dimension: | 7.0mm×7.0mm×4.4mm |
---|---|---|---|
Radiant Flux: | 10000-12000mW | Peak Wavelength: | 380-390nm |
Maximum Rating Forward Current: | 3250mA | Forward Voltage: | 7-9V |
View Angle: | 60° | Thermal Resistance: | 1.0-2.0 |
High Light: | 12W UVA LEDS,390nm UVA LEDS,3250mA UVA LEDS |
BYTECH CMH268A2V119V2Z6-S2P2 10w 12W 380nm 385nm 390nm UVA LEDS for Printing
Company Introduction:
Bytech is the first company in China to launch full inorganic package UV LED which is based on CMH(Ceramic,Metal,hard glass) technology platfrom. We can provide CMH series (high reliability) and U/ D series (high cost performance) products, including UVA/UVB/UVC/VCSEL. It covers curing, printing, (money) authentication, medical, disinfection/ sterilization and security industry.
Characteristics of UV LED
- Electrical / Optical Characteristics (Ta=25℃, RH=40%)
Parameter | Symbol | Units |
CMH268A2V119Z6V2-S2P2 (IF=3000mA) |
Peak Wavelength | λp | nm | 380-390 |
Radiant Flux | Φe | mW | 10000-12000 |
Forward Voltage | Vr | V | 7-9 |
Thermal Resistance | Rth | °C/W | 1.0-2.0 |
Spectrum Half Width | Δλ | nm | 11 |
View Angle | 2θ1/2 | deg | 60 |
- Absolute Maximum Ratings (Ta=25°C, RH=40%)
Parameter | Symbol | Units | Value |
DC Forward Current | IFmax | mA | 3250 |
Maximum Rating Junction Temperature | Tjmax | °C | 125 |
Operating Temperature Range | Topr | °C | -10 ~ +85 |
Storage Temperature Range | Tstg | °C | -40 ~ +100 |
Applications
● Fluorescent spectroscopy
● Sensors and monitors
● Bio-analysis/detection
● Phototherapy
● UV curing
● Printing
● Coating
Package Dimensions and Circuit
(Unit: mm)
Product Application Information
Package
Quality Control
In order to continuously enhance the quality of management and meet customers’ needs, we have passed through the ISO9001 quality management system certification.
fixtures modern is produced through standard procedures conducted by trained staffs.
100% of the LED fixtures will be tested and keep lighting for 24 hours to test its quality reliability, and we will also test its temperature after 24 hours lighting.
Then after it is cool we again test 100% of the lamps to see if it still work well. Each led Cabinet light should pass all these QC procedures before the packing.
Contact Person: Helen Yang
Tel: +86-13590418367