|
Product Details:
|
| Use In: | UV Curing, Ore Identification, Anti-counterfeiting Identification, | Lens Material: | Quartz Glass Lens |
|---|---|---|---|
| Peak Wavelength: | 365nm 385nm 395nm 405nm | Packaging Technology: | Silicone Dispensing |
| Radiant Flux: | 100-200mW | LED Chip: | Vertical Chip |
| Chip: | Zener | View Angle: | 120 |
| High Light: | 2525 Purple UV LED,365nm Purple UV LED,365 nm uv light source |
||
BYTECH 365nm 385nm 395nm 405nm UV Light Source 2525 UV LED chip Purple Light
Company Introduction:
Bytech is the first company in China to launch full inorganic package UV LED which is based on CMH(Ceramic,Metal,hard glass) technology platfrom. And we has applied for 15 patents since 2013 inculding 13 authorized patents. At present, We can provide CMH series (high reliability) and U/ D series (high cost performance) products. It covers curing, printing, (money) authentication, medical, disinfection/ sterilization and security industry.
Characteristics of U525A4V138Z1
*Electrical / Optical Characteristics (Ta=25℃, RH=40%)
| Parameter | Symbol | Units | Value |
| Peak Wavelength | λp | nm | 360~370 |
| Radiant Flux | Φe | mW | 100-200 |
| Forward Voltage | VF | V | 3.6-4.3 |
| Thermal Resistance | Rth | °C/W | ≤20 |
| Spectrum Half Width | Δλ | nm | 10.3 |
| View Angle | 2θ1/2 | deg | 120 |
*Absolute Maximum Ratings (Ta=25°C, RH=40%)
| Parameter | Symbol | Units | Value |
| DC Forward Current | IFmax | mA | 150 |
| Maximum Rating Junction Temperature | Tjmax | °C | 130 |
| Operating Temperature Range | Topr | °C | -40 ~ +60 |
| Storage Temperature Range | Tstg | °C | -40 ~ +85 |
Applications
● Anti-counterfeiting identification
● UV curing
● Ore identification
Package Dimensions & Circuit
(Unit: mm)
Characteristics of UV LED
Production Line
Quality Control
In order to continuously enhance the quality of management and meet customers’ needs, we have passed through the ISO9001 quality management system certification.
fixtures modern is produced through standard procedures conducted by trained staffs.
100% of the LED fixtures will be tested and keep lighting for 24 hours to test its quality reliability, and we will also test its temperature after 24 hours lighting.
Then after it is cool we again test 100% of the lamps to see if it still work well. Each led Cabinet light should pass all these QC procedures before the packing.
Contact Person: Helen Yang
Tel: +86-13590418367
