Product Details:
|
Viewing Angle: | 60° | Dimension: | 7.0*7.0*3.77mm |
---|---|---|---|
Peak Wavelength: | 417.5~425nm | Radiant Flux: | 5W~8W |
LED Chip: | Vertical Chip | Use In: | Bio-analysis/detection |
Circuit Layout: | 2 In Series And 2 In Parallel | Package Size: | 6.8mm*6.8mm |
High Light: | 6868 LED Strip Chip,420nm LED Strip Chip,420nm smd led chip replacement |
BYTECH 6868 5W to 8W 420nm S2P2 UV LED chip for Bio-analysis / detection
Company Introduction:
Bytech is the first company in China to launch full inorganic package UV LED which is based on CMH(Ceramic,Metal,hard glass)technology platfrom, and we has applied for 15 patents since 2013 inculding 13 authorized patents.
At present,Our UV LED product cover wavelengths of UVA, UVB and UVC, which has been applied for offset printing, screen printing, ink-jet printing, intaglio printing, UV exposure, air purification, sterilization, 3D printing and other industries. And we provide our clients with one-stop-shopping service, any UV LED module do you want, we can customize for you.
Characteristics of CMH268ABV203Z6-S2P2
^ Electrical / Optical Characteristics (Ta=25℃, RH=40%)
Parameter | Symbol | Units | Value |
Peak Wavelength | λp | nm | 417.5~425 |
Radiant Flux | Φe | mW | 5000~8000 |
Inverse voltage | Vr | V | 7.0~8.2 |
Forward Voltage | VF | V | 10 |
Thermal Resistance | Rth | °C/W | ≤20 |
Spectrum Half Width | Δλ | nm | 20 |
View Angle | 2θ1/2 | deg | 60 |
^ Absolute Maximum Ratings (Ta=25°C, RH=40%)
Parameter | Symbol | Units | Value |
DC Forward Current | IFmax | mA | 2000 |
Peak Forward Current (1/10 duty@1khz) |
IFp | mA | 2500 |
Maximum Rating Junction Temperature | Tjmax | °C | 125 |
Operating Temperature Range | Topr | °C | -40 ~ +65 |
Storage Temperature Range | Tstg | °C | -40 ~ +85 |
Package Dimensions & Circuit
(Unit: mm):
Characteristics Diagrams
Product Application Information
Applications
● Fluorescent spectroscopy;
● Bio-analysis/detection;
● Phototherapy;
● Curing;
● Printing;
● Coating.
Quality Control
In order to continuously enhance the quality of management and meet customers’ needs, we have passed through the ISO9001 quality management system certification.
fixtures modern is produced through standard procedures conducted by trained staffs.
100% of the LED fixtures will be tested and keep lighting for 24 hours to test its quality reliability, and we will also test its temperature after 24 hours lighting.
Then after it is cool we again test 100% of the lamps to see if it still work well. Each led Cabinet light should pass all these QC procedures before the packing.
Contact Person: Helen Yang
Tel: +86-13590418367