|
Product Details:
|
| Radiant Flux: | 13W-18W | Applications: | 3D Printing, Curing, Lithography |
|---|---|---|---|
| Peak Wavelength: | 400nm~410nm | Dimension Of Copper Substrate: | 26.8*28mm |
| Forward Voltage: | 3.3-4.0V | Test Current: | 9A |
| Chips Combination: | 1 In Series 12 In Parallel | Brand: | BYTECH |
| High Light: | BYTECH UV Led Curing Lamp,18W UV Led Curing Lamp,DLP UV LED Module |
||
BYTECH 405nm UV LED module 18W UV led curing lamp for DLP 3d printer
Company Introduction:
Bytech is the first company in China to launch full inorganic package UV LED which is based on CMH(Ceramic,Metal,hard glass)technology platfrom, and we has applied for 15 patents since 2013 inculding 13 authorized patents.
At present,Our UV LED product cover wavelengths of UVA, UVB and UVC, which has been applied for offset printing, screen printing, ink-jet printing, intaglio printing, UV exposure, air purification, sterilization, 3D printing and other industries. And we provide our clients with one-stop-shopping service, any UV LED module do you want, we can customize for you.
Characteristics of TLM2728A0V221Z1A1-R9-S1P12
1) Electrical / Optical Characteristics (Ta=25℃, RH=40%)
| Parameter | Symbol | Units | Value) |
| Test current | I | A | 9.0 |
| Forward Voltage | VF | V | 3.3-4.0 |
| Peak Wavelength | λp | nm | 400~410 |
| Radiant Flux | Φe | W | 13-18 |
| Spectrum Half Width | Δλ | nm | 15-18 |
2) Absolute Maximum Ratings (Ta=25°C, RH=40%)
| Parameter | Symbol | Units | Value |
| Maximum Rating Forward Current | IFmax | A | 24 |
| Maximum Rating Junction Temperature | Tjmax | °C | 125 |
| Operating Temperature Range | Topr | °C | -10 ~ +85 |
| Storage Temperature Range | Tstg | °C | -40 ~ +100 |
Package Dimensions and Circuit:
(Unit: mm)
Features
● UVA LED COB module
● High thermal conductivity common cathode copper substrate package
● With ESD protection device
● Quartz glass lens
● Dimension: 28mm×42mm×5.3mm
● Long operating life
● RoHS compliant
Our Service
Our Advantage
FAQ
Q: How to make a customized LED module?
A: Firstly, we need to confirm customer requirement through communication.
Secondly, we create the LED layout drawing and hole bitmap for confirmation
Thirdly, we make and test the sample board
Fourthly, we perform electronic and optical property parameters measurement
Fifthly, we go through reliability test.
Sixthly, we package and deliver the order package after getting Acceptance of Evaluation from Technical department.
Contact Person: Helen Yang
Tel: +86-13590418367
